£210.00 + vat
Our canopy fly screens are suitable for windows and vents where internal screens may not be suitable. Typical installations are where the windows may open inwards and there is no reveal for an internal screen or where windows are at a high level and a screen could not be accessed, rooftop vents, center pivot windows, or where staff may not be able to operate an internal screen on a daily basis
The canopy fly screens are manufactured from mild steel and are available made to measure in a pre-cut size flat pack for site assembly and come with a panel fly screen that can be removed.
Just input the overall width and height required into the calculator.
Please note that width sizes above 1400mm may be supplied with 2 fly screen panels.
- Description
Description
Click on the images to enlarge them
How Canopy Compares to Other Window Screens
Canopy isn’t the only way to screen a window — here’s how it stacks up against the other types we make, so you can check it’s the right fit before you order.
| Screen type | Best for | How it works | Max size | Mesh options | Fitting |
|---|---|---|---|---|---|
| Canopy (this screen) | Openings an internal screen can’t cover — inward-opening windows with no reveal, high-level windows, rooftop vents, or centre-pivot windows | An external steel canopy frame holds a removable mesh panel over the opening from outside | Panels over 1,400 mm wide are supplied as two panels | Standard mesh panel | Pre-cut flat-pack, mild steel frame, assembled and fixed on site |
| Roller | Windows you want to open freely, with the screen disappearing completely when not needed | Mesh is spring-tensioned inside an aluminium cassette; pull the handlebar down to cover the window, release to retract | Up to 1,800 mm of mesh drop from a 40 mm cassette | Easy View standard, midge, toughened pet-resistant, ECARF pollen — Sunox antibacterial as standard | Recess or face-fit; top-hinged Velux windows recess-fit, centre-pivot Velux mount to the wall |
| Hinged panel | A permanent, always-there screen and the lowest-cost option | A rigid mesh panel in an aluminium frame, hung on hinges with turn buttons to hold it shut — opens like a small door | Made to your panel size; self-assembly kit | Charcoal, grey or white standard mesh, plus pet, pollen and midge mesh | Hinged to the window frame or surrounding wall, inside or outside |
| Magnetic | Seasonal use — easy to take down and store when insects aren’t a problem | A mesh panel held in place by four corner magnets, which are screwed to the window frame | Made to your panel size | Standard mosquito, midge, pet and pollen mesh | Magnet mounts to the frame or surrounding wall, inside or outside; screen lifts off by hand |
| Horizontal sliding | Wide openings too big for a single roller or hinged panel | The opening is split into panels that run side to side on an internal wheel system within a slim 20 x 28 mm frame | Up to 3 m wide, in as many panels as the opening needs | Standard, midge, pet and pollen mesh — Sunox antibacterial as standard | Recess-fits into the window reveal; pre-cut, panels lift out for cleaning |
| Vertical sliding | Sash windows and openings taller than they are wide | Panels slide up and down instead of side to side, held at any height by spring-loaded pads, in a slim 20 x 28 mm frame | Made to your opening size | Standard, midge, pet and pollen mesh — Sunox antibacterial as standard | Recess-fits into the window reveal; pre-cut kit, or we can build and install it for you |