Canopy fly screens
Fly screens for canopies
Flyscreen canopies for windows
Canopy Fly Screens
Canopy fly screens for windows
|
Our canopy fly screens are suitable for windows and vents where internal screens may not be suitable. Typical installations are where the windows may open inwards and there is no reveal for an internal screen, where windows are at high level and a screen could not be accessed, roof top vents or where staff may not be able to operate an internal screen on a daily basis. The canopies can be manufactured from galvanised steel or UPVC and are available made to measure in a pre-cut to size flat pack for site assembly. The canopy sizes are typically 200 or 300mm deep depending on the window opening required. Click on the pictures for larger images. |
|
 |
This commercial kitchen had 3 centre pivot windows which needed fly screens installing. The only solution with centre pivot windows is to have an external canopy which the windows open into. |
 |
A UPVC canopy was manufactured and installed on site and then 3 separate removable fly mesh panels were fitted onto the canopy. |
 |
The panels can be removed so the windows can be cleaned. |
|
Our service includes CAD drawings for approval prior to manufacture. The canopy boxes can also be manufactured from stainless steel, galvanised steel and can be powder coated to any RAL colour. |
|
|
|
The finished screens meet the Food Safety Regulations of 1995 and keep out all types of flying insects. |
